「청정대기법」 (제7479조)
• 국 가 ‧ 지 역: 미국 • 법률번호: 77 Stat. 392(제정), 공법 제116-260호(개정) 미국법전 제42편제85장 제7401조-제7675조(현행) • 제 정 일: 1955년 7월 14일 • 개 정 일: 2020년 12월 27일
For purposes of this part— (1) The term "major emitting facility" means any of the following stationary sources of air pollutants which emit, or have the potential to emit, one hundred tons per year or more of any air pollutant from the following types of stationary sources: fossil-fuel fired steam electric plants of more than two hundred and fifty million British thermal units per hour heat input, coal cleaning plants (thermal dryers), kraft pulp mills, Portland Cement plants, primary zinc smelters, iron and steel mill plants, primary aluminum ore reduction plants, primary copper smelters, municipal incinerators capable of charging more than fifty tons of refuse per day, hydrofluoric, sulfuric, and nitric acid plants, petroleum refineries, lime plants, phosphate rock processing plants, coke oven batteries, sulfur recovery plants, carbon black plants (furnace process), primary lead smelters, fuel conversion plants, sintering plants, secondary metal production facilities, chemical process plants, fossil-fuel boilers of more than two hundred and fifty million British thermal units per hour heat input, petroleum storage and transfer facilities with a capacity exceeding three hundred thousand barrels, taconite ore processing facilities, glass fiber processing plants, charcoal production facilities. Such term also includes any other source with the potential to emit two hundred and fifty tons per year or more of any air pollutant. This term shall not include new or modified facilities which are nonprofit health or education institutions which have been exempted by the State. (2)(A) The term "commenced" as applied to construction of a major emitting facility means that the owner or operator has obtained all necessary preconstruction approvals or permits required by Federal, State, or local air pollution emissions and air quality laws or regulations and either has (i) begun, or caused to begin, a continuous program of physical on-site construction of the facility or (ii) entered into binding agreements or contractual obligations, which cannot be canceled or modified without substantial loss to the owner or operator, to undertake a program of construction of the facility to be completed within a reasonable time. (B) The term "necessary preconstruction approvals or permits" means those permits or approvals, required by the permitting authority as a precondition to undertaking any activity under clauses (i) or (ii) of subparagraph (A) of this paragraph. (C) The term "construction" when used in connection with any source or facility, includes the modification (as defined in section 7411(a) of this title) of any source or facility. (3) The term "best available control technology" means an emission limitation based on the maximum degree of reduction of each pollutant subject to regulation under this chapter emitted from or which results from any major emitting facility, which the permitting authority, on a case-by-case basis, taking into account energy, environmental, and economic impacts and other costs, determines is achievable for such facility through application of production processes and available methods, systems, and techniques, including fuel cleaning, clean fuels, or treatment or innovative fuel combustion techniques for control of each such pollutant. In no event shall application of "best available control technology" result in emissions of any pollutants which will exceed the emissions allowed by any applicable standard established pursuant to section 7411 or 7412 of this title. Emissions from any source utilizing clean fuels, or any other means, to comply with this paragraph shall not be allowed to increase above levels that would have been required under this paragraph as it existed prior to November 15, 1990. (4) The term "baseline concentration" means, with respect to a pollutant, the ambient concentration levels which exist at the time of the first application for a permit in an area subject to this part, based on air quality data available in the Environmental Protection Agency or a State air pollution control agency and on such monitoring data as the permit applicant is required to submit. Such ambient concentration levels shall take into account all projected emissions in, or which may affect, such area from any major emitting facility on which construction commenced prior to January 6, 1975, but which has not begun operation by the date of the baseline air quality concentration determination. Emissions of sulfur oxides and particulate matter from any major emitting facility on which construction commenced after January 6, 1975, shall not be included in the baseline and shall be counted against the maximum allowable increases in pollutant concentrations established under this part.
「청정대기법」 (제7479조)
• 국 가 ‧ 지 역: 미국 • 법률번호: 77 Stat. 392(제정), 공법 제116-260호(개정) 미국법전 제42편제85장 제7401조-제7675조(현행) • 제 정 일: 1955년 7월 14일 • 개 정 일: 2020년 12월 27일
이 부에서 사용하는 용어의 정의는 다음과 같다. 1. "주요 배출시설"이란 다음 유형의 고정배출원으로부터 1년에 100톤 이상의 대기오염물질을 배출하거나 배출 가능성이 있는 다음의 대기오염물질 고정배출원을 말한다. 입열이 시간당 2억 5천만 영열량(BTU)을 초과하는 화석연료 증기 발전소, 선탄(選炭) 공장(열건조장치), 크라프트 펄프 공장, 포틀랜드 시멘트 공장, 1차 아연 제련소, 제철소, 1차 알루미늄 광석 환원 공장, 1차 구리 제련소, 하루 50톤을 초과하는 폐기물을 처리할 수 있는 기초단체의 소각장, 불산·황산·질산 공장, 정유소, 석회공장, 인광석 처리 공장, 코크스로(-爐) 배터리, 황 회수 공장, 카본블랙 공장(퍼니스법2), 납 광석 제련소, 연료전환공장, 소결(燒結)공장, 2차 금속 생산 시설, 화학 처리 공장, 열입이 시간당 250 영열량(BTU)을 초과하는 화석 연료 보일 러, 30만 배럴을 초과하는 용량의 석유 저장 및 운송 시설, 타코나이트암 원석 처리 시설, 유리섬유 처리 공장, 숯 생산시설 또한 이 용어는 대기오염물질을 1년에 250톤 이상 배출할 가능성이 있는 그 밖의 모든 배출원을 포함한다. 이 용어는 주정부로부터 면제를 받은 비영리 보건 또는 교육 기관인 신축·변경 시설을 포함하지 아니한다. 2. 가. 주요 배출시설의 건축에 대하여 사용하는 "착공"이란 그 소유자 또는 운영자가 연방, 주, 지역의 대기오염물질 배출 및 대기질 관련 법령이나 규정에서 요구하는 모든 필수 사전인허가를 취득하였으며, 1) 해당 시설을 물리적으로 현장에서 건축하는 지속적 활동을 시작하였거나 그리하도록 한 경우 또는 2) 합리적 기간 내로 완공하기 위하여 해당 시설의 건축 활동을 하기 위한 구속력 있는 합의나 계약상 의무를 체결하였고 소유자 또는 운영자가 상당한 손해를 보지 아니하고는 이를 취소하거나 변경할 수 없는 경우 중 어느 하나에 해당함을 말한다. 나. "필수 사전 인허가"란 이호 가목의 1 또는 2의 행위를 하기 위한 전제조건으로서 허가 당국이 요구하는 허가 또는 인가를 말한다. 다. 배출원 또는 시설과 관련하여 사용하는 때의 "건축"은, 배출원 또는 시설의 변경(이 편 제7411조제1항에 서 정의하는 것을 말한다)을 포함한다. 3. "최적가용관리기술"이란 주요 배출시설에서 배출하거나 그로부터 유래하는 이 법의 규제대상인 오염물질 저감의 최대 정도에 기초한 배출 제한으로서, 연료 불순물 제거, 청정 연료, 또는 그러한 오염물질의 관리를 위한 처리나 혁신적 연소기술과 같이, 그러한 시설에서 생산과정 및 이용 가능한 방법, 체제 및 기술을 적용함으로써 달성 가능한 것으로 허가 당국이 에너지, 환경, 경제 영향 및 그 밖의 비용을 고려하여 사례별로 결정하는 것을 말한다. 어떠한 상황에서도 "최적가용관리기술"의 적용은 이 편 제7411조 또는 제7412조에 의거하여 수립하는 기준에 따른 배출 허용량을 초과하는 오염물질의 배출을 야기하여서는 아니 된다. 이 호를 준수하기 위하여 청정연료나 그 밖의 수단을 활용하는 배출원에서 발생하는 배출이 1990년 11월 15일 전에 이 호에서 요구하는 수준을 초과하여 증가하는 것을 허용하여서는 아니 된다. 4. "기준 농도"란, 어느 오염물질과 관련하여, 이 부에 따라 어느 지역의 최초 허가 신청이 있던 당시에 존재하는 외부 농도 수준으로서, 환경보호청 또는 주 대기오염 관리 기관에서 이용할 수 있는 대기질 자료와 허가 신청자가 의무적으로 제출하여야 하는 측정자료에 기초한 것을 말한다. 그러한 외부 농도 수준은 1975년 1월 6일 전에 건축을 착공하여 기준 대기질 농도의 결정일까지 그 운영을 시작하지 아니한 주요 배출시설에서 발생하여 해당 지역에 존재하거나 그 지역에 영향을 미칠수 있는 것으로 예상되는 모든 배출을 고려하여야 한다. 1975년 1월 6일 후에 건축을 착공한 주요 배출시설의 황산화물 및 입자상물질 배출은 기준에 포함하여서는 아니 되며 이 부에 따라 수립하는 오염물질 농도의 최대 허용 증가치에서 제하여야 한다.